Stabile PRO VESA 75-100 Instructions
Your Stabile PRO VESA is ready to use right out of the box. Simply attach your device to the mount using the instructions provided by your device’s manufacturer.
The ball pivot is already adjusted at the factory for smooth movement and stability. Over time, you can make small adjustments if needed.
⚠️* Important: Do not tighten the ball pivot more than its original factory setting, as this could damage the mount.
To Tighten the Ball Pivot:
1. Hold the black pivot nut firmly.
2. Turn the VESA mount clockwise (viewed from the front) until you reach the desired firmness. Stop before going past the original setting.
To Loosen the Ball Pivot:
1. Hold the black pivot nut firmly.
2. Turn the VESA mount counterclockwise (viewed from the front) until the movement feels right.
⚠️ CAUTION NOTE:
Never over tighten the pivot nut to a condition where the ball pivot joint will not move (an extreme locked condition of the VESA Mount), this over tightening may cause failure. The pivot nut may be tightened enough so that the user finds it somewhat difficult to move, however never attempt to tighten the pivot excessively in an effort to making it impossible to move.
To see, learn more, or to purchase the Stabile PRO VESA
If you have any questions, please let us know
You may also like these products