EnCloz VESA Instructions

INSTALLING IPAD: 

Remove the 6-8 screws* on the back of the EnCloz holder with the supplied torque limiting 5/64” wrench**. With the face plate down on the table, place the iPad face down into the face plate with the proper orientation with the home button. Line up the back plate with the proper orientation to the rear camera and reinstall the 6-8 screws.

* Never store screws in face plate without the back plate

** Potential failure may result by not properly using the supplied torque limiting wrench and/or by over-tightening.  The torque limiting wrench must be used with your fingers only.


The EnCloz is custom built by Thought Out Company - we can custom build virtually anything at your request

 

To see, learn more, or to purchase the EnCloz VESA

 

If you have any questions, please let us know


You may also like these products