PED4 Coil IPM10 - iPad mini Flexible Stand Pivoting$69.99
iPad mini Flexible Stand
Gooseneck & Pivoting
PED4 Coil IPM10
The long, snake like, flexible, gooseneck coil stand can be manipulated into any shape you imagine to hold your iPad mini. The PED4 Coil IPM10 is Made in USA from solid and flexible steel. The PED4 Coil IPM10 iPad mini stand can be mounted anywhere and everywhere you can imagine.
Roll, spin, turn, rotate, pitch, yaw...
Whatever you call it, the PED4 Coil IPM10 iPad mini stand can be positioned to it. Using the solid 5/8" diameter steel ball and socket technology you will feel the smooth pivoting freedom to any position you desire. (Friction screw adjustable)
Wrap it up
Any way you want, it will do it
At just under 3 pounds you will immediately see and feel the quality of this very unique flexible iPad mini stand. The 54" long, 5/8" diameter vinyl wrapped flexible coil is very strong. The strength comes from two steel lengths twisted together into one. On one end is a 5/8" solid steel ball that creates a fluid pivot joint for the iPad mini to be positioned instantly where you want it. (Friction screw adjustable)
Case or Bare
Engineered to be used daily
The PED4 Coil IPM10 iPad mini stand has user configurable fingers that creates a snap like fit to hold the iPad mini. These fingers allow the mount to be used with or without a case efficiently, while securely holding the iPad mini as your hand would. Once the holder is configured to your desired fit, there are no special procedures needed, the iPad mini installation and removal is instantaneous. All of the controls, ports and camera are fully accessible at all times.
- 54" flexible coil to twist to any shape, (limited to a minimum 5" bend radius)
- 5/8" diameter, black vinyl wrapped
- 6 slide adjusting Alloy Fingers (with soft vinyl covers to protect the iPad mini)
- 5/8" steel ball pivoting holder (Friction screw adjustable)
- Roll: ∞ infinite (when device is parallel to support shaft there is an index for the rotation of portrait and landscape)
- Yaw: ∞ infinite (left to right)
- Pitch: >180˚ (front to back)
- Solid and flexible heavy coil steel construction
- Solid copolymer holder construction
- Full control, port and camera access
- Square credit card reader compatible
- PayPal credit card reader compatible (Limited, reader must turned away from holder finger)
- Color: Black
- Designed for iPad mini with or without a case, skin, bumper or protective cover. Is not recommended for full size iPad - see our other recommended products
- Width: 5.0" - 6.0"
- Height: 7.6" - 8.6"
- Depth: Slide finger is .6" tall
- Weight: 2.900 Pounds
- Length: 54"
- Made in the USA
- 54" x 5/8" diameter vinyl wrapped flexible gooseneck coil and steel ball
- IPM10 Adjustable Holder Assembly
- 5/64" Wrench (torque limiting)
- 3/32" Wrench
- D-Shaped Fixture Plate
- Click here to download (Coming soon)
WHAT OTHERS ARE SAYING:
Thomas Anderson tablet2cases.com "...very few stands offer true flexibility like the PED4 Coil IPM10 from Thought Out."
- The setup and use of the PED4 Coil IPM10 with any automobile or similar setups will have varying results.
- While extremely strong for its size, the Made in USA coil cannot defy the laws of physics and gravity. Installations and uses cannot exceed the ability of the coils strength. Coil should not be used in a manor that allows more than 18 inches of coil from the supported end to the holder end (cantilever from where the device is).
Keyboard, case, coat rack, sweater and iPad mini not included
PED4™ is a trademark of Thought Out Company
Commercial 30 Day Limited Warranty - Manufacturing Defect